ETC Source Four Ellipsoidal – LED (S4WARD)

Source 4WRD (Watt Reduction Device) LED is a replacement for a standard Source Four® burner assembly that will convert the HPL source to a white-light LED and provides a significant reduction in power consumption. The simple and quick upgrade is nondestructive and takes less than a minute. In most cases it can even be done without breaking the fixture’s focus. Source 4WRD LED is theatrically dimmable via DMX or line dimmable, with a traditional LED curve, to allow flexibility for your installation. And, because it is an LED source, your fixtures will run cool and efficiently without lamp replacements.

Product Description

Fixture Options
  • 5*, 10*, 14* 19*, 26*, 36*, 50*,  70*, 90*
  • S4 zoom barrel 15 – 30 degree
Options Include
  • Mounting gear suited for stands, floor, or hanging
  • Color frame
  • Gobo Holder (Size A or B) w/Donut
  • Drop-In Iris
  • Stage Pin or Edison Plug
Product Features
  • 5º, 10º, 14º, 19º, 26º, 36º, 50º, 70º and 90º field angles  – see interactive ETC Photometric Chart to determine your barrel
  • Additional Zoom lenses available
  • Faceted dichroic reflector removes 90% of IR heat from beam
  • Interchangeable lens tubes
  • Rotating barrel ± 25º
  • Three-plane stainless-steel shutter blade assembly
  • Tool-free lamp adjustment
  • Insulated rear handle
  • Rugged die-cast aluminum construction

PHYSICAL • Rugged, die-cast aluminum construction • Can be fitted to any Source Four fixture body (not for Source Four Par/nel, Fresnel or jr.) • Seven segment display for simple DMX setup • Two button user interface • Easy mounting with single screw attachment • Replaces Source Four burner assembly • Available in black, white, silver and custom color • IP20 rating for indoor use only • UL and cUL Listed – S4WRD: UL1598C – S4WRDFB: UL1573 • US patents issued and pending • Three-year warranty ELECTRICAL • 114-125V, 60Hz • 155 watt draw at full (182 watt theoretical max. draw) • 30,000 hour L70 Rating (ETC estimate) – Life testing under way. Results pending • DMX in and thru via RJ45 connector – DMX is not

ELECTRICAL • 114-125V, 60Hz • 155 watt draw at full (182 watt theoretical max. draw) • 30,000 hour L70 Rating (ETC estimate) – Life testing under way. Results pending • DMX in and thru via RJ45 connector – DMX is not self-terminating • One-meter power cord • AC and DMX dimmable (see ‘Dimming Performance’ note) • Two fixtures per circuit (D20 Module) when using AC dimming (recommended) • 14 fixtures per non-dim circuit (R20 Module) when using DMX dimming • Inrush: 30A (First half-cycle) at 120V • Typical Power Consumption at 120V – Idle Power / Current: – DMX Mode: 1.2W/.046A – AC Mode: 0W – Full Intensity Power / Current: 155.7W/1.35A

OPTICAL • Tool free field adjustment • LED lamp consisting of four CREE LED Modules – LED lamp is fragile and should not be touched • Two LED arrays to choose from – 3000K, 80+ CRI output – 3000K, 90+ CRI output (Gallery version) • Uses the Source Four ellipsoidal’s existing reflector and optical system

CREE LED Modules – LED lamp is fragile and should not be touched • Two LED arrays to choose from – 3000K, 80+ CRI output – 3000K, 90+ CRI output (Gallery version) • Uses the Source Four ellipsoidal’s existing reflector and optical system

 

 

Manufacturer Info

Rental Pricing

Daily Rate$55 +Barrel Cost
Weekly Rate$165
DealkerCall for pricing
<< return to products